All Posts by Marco J

Top Record Player Upgrades

Introduction

Usually, we think that we’ve hit jackpot when we buy the turntable we wanted, but what if we can improve the sound we already adore? Turntable upgrades are basically superior turntable parts. Since most record player parts can be replaced, this replacement often means an improvement.
You don’t need to replace the parts on your record player only when they break down – the manufacturers are so innovative these days that the market receives a bulk of turntable upgrades on a daily basis.

Literally speaking, each day brings us superior turntable parts, so you should just check what’s on the menu every once in a while, and you can find perfect upgrades for your record player.

What are turntable upgrades and why should you consider them?

As we’ve already mentioned, turntable upgrades are various bits, pieces, and turntable parts that are supposed to improve the overall quality of your record player. There are some parts that are exclusive for certain record player models, but there are also versatile upgrades that can be implemented in the design of any turntable.

This is also the only thing you need to worry about – make sure that you buy those upgrades that can be installed into your record player.

You should consider purchasing vinyl upgrades for many reasons. First of all, you can never be truly satisfied with how your record player sounds. That is, if all the parts are standard issue. Furthermore, some parts are simply better than others. Another reason why you should consider upgrading your turntable involves broken, outdated, and defective parts.

Your record player can always get better. There’s no end to modification once you get hooked onto it, as replacement and upgrade parts are fairly cheap when compared to the entirely new purchase of a record player.

Types of turntable upgrades

The list of turntable upgrades is basically a list of turntable parts – each part serves a simple function which can be upgraded:

  • Turntable Tonearm

The tonearm is one of the crucial parts of every turntable. It’s basically the arm that performs sweeping motions across your vinyl records. It also holds the cartridge and the turntable stylus. You should consider purchasing your tonearm once it slows down, or once the stylus and the cartridge become unstable while attached to it.

  • Turntable Cartridge (Phono)

The cartridge governs the performance of your vinyl records, and by upgrading it you’ll upgrade the overall sound quality of your record player. Cartridges can be purchased cheap, but there are models that cost above $100.

  • Turntable Stylus

The stylus is also called the turntable needle. This part reads the information on vinyl records and performs the process that’s called tracking and reading. A good record player needle means better sound.

  • Mat

The mat of the turntable is basically a record player support. The stability of your turntable largely depends on this factor. Upgrades of record player mats involve more beautiful models, but also the ones that look better than the one you have.

Top turntable upgrade parts

Round Lazy Susan Table Centerpiece – Breadboard with Beech Inlay Stripes 16”


Check out on Amazon

Round Lazy Susan’s Breadboard Table centerpiece is very beautiful, but it’s also quite expensive. This is a matt upgrade, and you should consider it if you want to improve the outward appearance and stability of your record player.

Pro-Ject: Acryl-It Platter Upgrade


Check out on Amazon

Pro-Ject makes some of the best record players on the market. Their Acryil-It can only be compared to their other products. This is a phenomenal platter upgrade which is moderately expensive, but worth the cash.

Tech Play Gold, pack of 2, Diamond Tipped Needle for Turntable – Standard Needle Upgrade


Check out on Amazon

Tech Play’s Diamond Tipped needles are compatible with most Jensen, Teac, Numark, and Crosley record players. Basically, these needles will enhance the overall sound output of your record players. The price is fair, and the quality is phenomenal.

Pro-Ject: Leather-It Platter Mat, Black

Check out on Amazon

Plainly speaking, Leather-It is the same as Acryil-it. The only differences are in the material (which is obvious), and the price. Pro-Ject’s Leather-It platter mat is cheaper than most mat upgrades.

Audio-Technica: ATN95E Replacement Stylus for AT95E & AT-LP120

Check out on Amazon

If you own Audio-Technica AT95E or AT-LP120 (two of audio-technica’s most famous models), the ATN95E stylus is something you will want to have. This record player stylus is simply superior when compared to other models, and it’s fairly cheap too.

This turntable stylus falls into the moderately expensive price point category, but it’s certainly valuable for the money.

Vinyl Record Audio Rip – How To Do It And Why Should You Do It

Introduction

Vinyl records are all but dead – this is (yet again) a wonderful time to be alive, mainly because there’s a totally new vinyl market. Innovative artists and manufacturers have devised new machines and contraptions that will help us enjoy our vinyl records more easily, and one of these inventions is the digital audio rip software.

We’ll talk about what exactly is this software, what are the benefits of digital ripping, and how to actually do it, so if you’re interested in this, just continue reading.

What is Digital Rip

A digital rip is basically a conversion of vinyl record’s data to another type of format. Usually, most people settle for .MP3, as it’s one of the standard digital formats that most machines recognize and support.
There are some record players that come equipped with this software, but you can always purchase it online. It’s virtually impossible to digitally rip vinyl record’s data without this software though.

What are the benefits of digital ripping – Why should you do it?

There are a lot of benefits of digital ripping your vinyl records, but we’ll mention the ones that are absolutely the most important.

  • Increased compactness

Vinyl records are usually quite large, whereas the CDs and DVDs where you will convert the data are much more compact. A vinyl record may fit inside a larger bag, but you can always store a digitally rip CD in a pocket of your jacket, for example.

The increase in compactness is definitely one of the major benefits of digitally rip vinyl records, but it’s considered to be less important than the other two we’re about to see.

  • More versatility

In the case that your record player breaks down, you’ll be left without your music friend until it’s repaired (or until you buy a new one). In any case, you won’t get to enjoy your record players. If only you had a copy of your vinyl record on a CD or DVD, you could still enjoy your music.

More versatility also means that you’ll be able to throw parties where you can playback your vinyl records on your PC or laptop. Now, there are record players that are compatible with external speakers, but there are those that aren’t. PCs and Laptops, on the other hand, can reproduce music at an increased volume.

  • Increased dynamic range

Hard pressed vinyl records go through rough compression when they are mastered. The only way to compensate for the lack of volume is to digitally rip your records. This way, the dynamic range will receive a significant boost, improving the general sound quality of your records.

Digitally Ripping your Records – How to do it?

Equipment

For starters, you will need a record player that comes supplied with software that allows you to digitally rip your audio.

Next, you’ll also need a recording software. You can purchase this software online, or you can get free (or trial) versions. Some good examples of free software are Audacity, Garageband, and such. There are also some high-end recording software that makes the entire process extremely simple, such as Vinyl Studio, but you should be prepared to pay top dollar.

Setting Up

Before all else, you’ll need to prepare the record player. The setting up of your gear is much similar to the setup of musical instruments – you just can’t reproduce a good sound if your gear is old and unconditioned.

Make sure to clean all of the parts thoroughly, and to correctly align the stylus, needle, and the cartridge. Your turntable needs to be in tip-top condition if you want a digital rip to succeed with optimal performance.

Furthermore, if you’re unsure on how to properly setup your record player, consider paying a visit to a specialist. These professionals will gladly setup your turntable for you (for a fee, of course).

Recording your digital rips

After you’ve cleaned your record player and records, don’t forget to properly attune your turntable. If you’ve already done with all this, you can proceed to recording your digital rips. There are a few steps you’ll need to follow:

Step 1 – Wiring your turntable to a pre-amp

This step is relatively easy – just plug the pre-amp into your record player and you can proceed onto the next step.

Step 2 – Line-in the inputs

All of the inputs should be set to the “line level”. There’s a good way to recognize a mistake in the early stages – if there’s any distortion, you missed some inputs.

Step3 – Software setup

This process includes installing the software and preparing it for work. During the installation process, you will be prompted to fill in several blanks, such as the soundcard you’re using, sample rate, playback pre-roll, metronome, synchronization, and such.

Step4 – Creating the stereo channel & Recording

This step is relatively easy – most software types will have drop-down menus that allow you to create a channel” and “record”. Execute both actions respectively and you’re almost done.

Step5 – Export & finish

Once you export the files, you can review them for any mistakes. If there are none, you’ve successfully ripped your records.

Should I Repair LP Record Covers?

Introduction

Most people storage their LP records in their corresponding record covers, and this is perfectly fine until these covers wear out, tear, or get destroyed in any other way. Since it’s the actual record that’s important, people often throw damaged covers away, but what if I told you that you should repair these covers?

You can always shelter your records in the cover of some other LP record, but you will risk unnecessary confusion, as you can easily mix up your records. There’s also the problem of multiple coverless records. This article was created so that you can make the decision of repairing your record covers more easily.

What are your options?

Well, when it comes to record cover repairs, most people instinctively just throw them away when they become unusable, but that’s not all that you can do. You can glue together the seams and spine splits, you can pressure the warped lips of your LP records, scrub down the debris and dust, and so on.

All I want to say is that you have multiple options, and each option comes with a whole set of arguments (pro and contra).

Option #1 – repairing the LP record covers

If you want to preserve your vinyl record covers, you can do it in a multitude of ways. We’re going to mention just some of them:

Repairing Worn Record Covers – Minimal Damage

Worn out record covers are the easiest to fix. A careful scrub (or two) with polishing cream or spray can get the most out of the rub-wear off. You might’ve heard about the record repair and that you can use water in these situations – when it comes to record covers, you mustn’t use water. Apart from that, you should only use sprays and creams that don’t moisturize the surface on which they are used.

Repairing Torn Record Covers – Medium Damage

With time, your record covers will wear out – that’s inevitable. However, if you don’t pay attention to them, your covers might get torn – this is considered to be medium damage (between worn which is minimal, and completely destroyed which is maximal).

Torn record covers can often be glued back to the original state. They might not look as awesome as when you first bought them, but they could still provide decent shelter for your LP records. In more extreme cases, you could often tape some cardboard material to fill the gaps.

Repairing Destroyed Record Covers – Complete Ruination

Now, this is where things get tricky. Those record covers that are completely ruined often require an innovative approach. You’ll have to remove the stickers, glue together any split spines and seams, tape together cardboard material wherever there are holes and gaps, and so on.
Any record cover can be saved, and it’s up to you to decide whether or not the whole process is worth your time and effort. Just remember, you’ll have to scissor, glue, and tape your way through completely ruined record covers if you want to restore them to their virgin condition. You may even need to paint or draw some of the content (if you wish to completely restore its condition).

Option#2 – switching to another method of storage

The second option implies that you don’t want to bother with record cover repairs. Sometimes, the situation is so dire that you just don’t want to waste your time. Furthermore, there are times when the situation just seems to hopeless – such is with completely ruined record covers.

If you still want to shelter your records and don’t want to save your record covers, you need to look for an alternative solution. One of those solutions would be switching to another method of storage.

This alternative method of storage can be permanent or temporary:

Temporary Alternative Method of Storage

You can’t just put your records anywhere if they’re coverless – the fragile composition of vinyl records demands proper care, as any environment apart from their covers may be hazardous for their structure. Basically, this is how records get damaged, dirty, and warped.

A temporary solution means that you’ll shelter your records in some other covers while you search for a more permanent solution.

Permanent Alternative Method of Storage

You can literally go to a flea market and search for record player covers. These covers are usually less than $1, so you can buy them in bulk. If you don’t find the corresponding cover for your vinyl record, just make sure that the dimensions are good.

Record Player & Skipping Problems – Fixing The Problem

Record Players are amazing, but they sometimes malfunction, and it’s up to us to determine the best course of action when they do. Now, some people don’t bother too much – replacing an old record player is a solution too.
anitique vinyl modelOther people (who don’t possess handyman skills) simply take their record player for repairs. This is definitely highly recommended if your record player doesn’t work at all, but skipping isn’t that much of a problem, now, is it?

We’re here to discuss the matter of skipping turntables – everyone can do it at their homes, so you don’t ever have to pay extra for repairs anymore.

Step 1 – Recognizing the problem

It’s not hard to recognize a part when your turntable skips, but the real problem might be somewhere else. Is your record player old? Some record players are simply beyond repair, and if your model is really old, you might want to consider purchasing a new turntable.
intirior record playerBy simply recognizing the problem you’ll know what you need to fix. There are virtually limitless possibilities of what could’ve gone wrong, from simply positioning of your record player, over bad vibes, to hardware malfunction. Once you know what’s wrong, you can proceed to step 2.

Our Recommendation:

You should search the web for the inlay of your turntable. Memorize where the parts are, how they look like, and how they perform. Search for anything that goes out of the pattern, and you’ll find what you’re looking for in no time.

Step 2 – Isolate your record player

Sometimes, there are cases where the problem is not so obvious. There’s a chance that your record player will continue skipping, even if you’re already performed everything in your might to avoid this situation.

Sometimes, the vibrations are the problem. Turntables produce massive vibrations when they work, so you should definitely isolate yours before you proceed with more aggressive approach.

You can easily isolate your record player by placing it on anything heavy (preferably, on anything that can snuff out excess vibrations, such as metal or firm wood).

Our Recommendation:

You can easily skip this part if your record player is extremely heavy. These record players seldom skip because they’re badly isolated, so you should search for other signs of malfunction.

Step 3 – Level your Record Player

Every record player functions in a similar way – by tracking the vibrations and re-sending them through the emitter (woofer, speaker, etc.). You want to level your turntable to reduce the risk of defective tracking.

You should always make sure that the surface and the base of your record player are in parallel. If they’re not, however, your record player might skip, or even malfunction after extended periods of time.

Our recommendation:

Most record players come with a straight surface, so you will naturally assume that they’re evenly leveled. Now, even if that might be the case, you should still consider checking the level – this might be the problem you’re looking for.

Step 4 – Check the Needle (Turntable Stylus)

You might’ve already known this, but every record player produces sound in a very simple way – the record player needle (or, the record player stylus) grazes the record, sending vibrations that are later converted to sound.
turntable needleNow, this needle is very, very fragile, and any damages done to it can hardly be perceived by naked human eye. You don’t need to search for microscopes – if you’ve already done everything and your turntable still skips, it’s the stylus that’s bugging you.

Our Recommendation:

If you have settled for the solution where the record player needle is the problem, there’s not much you can do apart from buying a new one. Record player needles are always quite cheap, and you can get a replacement one for a budget price.

Step 5 – Check for damages on records

Even though this is rare, it’s not a rule that the skipping of your record player is caused by a defective part. Sometimes, it’s the records that are making all of the fuss. Most people would assume that by playing several records, you can simply deduce that they’re not the problem. That’s not necessarily true.

After prolonged exposure to sharp needles, your vinyl records can be damaged. Records are, basically, round-shaped data discs that will lose some information after they’ve been grazed by a needle that doesn’t support a certain type of LP.

Our Recommendation:

Always make sure to play records that your record player can support. For instance, some record players can reproduce 7”records, but can’t 8” records.

Lathe Cutting Your Own Records – Beginner’s Guide

What is lathe cutting and why should you consider doing it?

Lathe cutting is, basically, a technique to make or modify vinyl records. A lathe is, basically, a tool that can be used in various different ways, and it will help you to produce (or modify) music records.
Lathe cutting isn’t too hard, but the learning curve is quite steep – if you’re talented, you can master it easily, but there are quite a lot of things you’ll need to know.

First of all, record modification and production are reserved for professionals, so laymen might have a hard time grasping the jargon and terminology. We’re here so that even the beginners feel comfortable about lathe cutting.

Why should you consider it? Not only is lathe cutting profitable – it’s also a hobby that’s both rewarding and enjoyable.

The sound difference – Lathe Cut Records VS Pressed Records

If we’re to compare the sound of lathe cut records and (hard) pressed records, we could easily spot some major differences. First of all, lathe cut records are filled with more bass. The bass resonance in these records is superior to hard pressed vinyl records in all aspects.

The only downfall is that lathe cut records sound less in terms of overall volume. A professional lathe cut artist (if he did everything by the book) will cut into the record so that the distortion is minimal, but this often has less volume as the result.

Furthermore, a quality cut often means that the overall sound quality of the vinyl record is superior to a hard pressed vinyl record.

The preparation difference – Lathe Cut VS Pressed Vinyl

Lathe cutting often requires weeks while pressing vinyl records requires months. This is one of the main reasons why people prefer lathe cutting over pressing.
People who do their cutting with lathe tools and by hand are often pressed for this solution because of the lack of equipment needed for hard pressing vinyl records. Pressing records often requires the use of professional machines which are expensive and automated, which means that you have less control over the outcome.

Tools you need to lathe cut your own records

You’ll need several tools to lathe cut your records, which include:

  • Polycarbonate Discs

Polycarbonate discs are much thicker when compared to standard issue records (three millimeter thick, to be precise). These discs feature superior durability, and they’re less inclined to environmental damage, warping, and such. They’re usually cheap, so you can buy them in bulks.

  • Lathe Cutting Needles

Needles are one of the crucial elements for lathe cutting records. There are different types of lathe cutting needles, such as cone shaped needles, triangle shaped needles, crystal needles, and sapphire cutting needles. We recommend triangle shaped needles, as they are very durable, and you can lathe cut approximately three hundred records before they degrade.

  • Lubricants

Polycarbonate discs are thick, so they’re often too firm for lathe cutting. You’ll need to use a lubricant to soften the overall surface of discs. This will minimize the friction, so your cutting process will be easier. To apply the lubricant properly, only use it on the side you want to cut.

How to lathe cut your records

Lathe cutting involves the conversion of a record track format onto a polycarbonate discs using a lathe cutting needle. You’ll need your song in a certain format (usually it’s a .WAV format) for mastering, at the standard sample rate (usually, 44.1 kHz).
You’ll need a mastering machine (a simple 8-channel panel will suffice), so that you can easily adjust the soundstage at a later point.

If you’re a complete beginner, we recommend that you pay attention to how your vinyl records sound when played at your own turntable. You want the outcome to look something like that.

Tips & Tricks for beginner lathe cutters

Lathe cutting is quite hard, as we’ve previously mentioned, so there are things you should look out for. We’ve compiled a list of things that could help you during your very fist lathe cuts:

  • Before you playback your lathe cut records, clean them thoroughly using microfiber cloth & static brush. A record player pad can be very useful too;
  • The weight of your tonearm should be approximately 1.75 – 2.5 grams;
  • Always lower the record player tonearm with your hand;
  • Distortion means that the record player needle isn’t placed properly in groove. If this happens, reset the record player needle;
  • Pump up the record player volume. Lathe cut records are usually quieter;

How To Use A Turntable – Operating A Crosley Record Player

Introduction – a foreword about Crosley Record Players

First of all, there are tons and tons of different record players, and Crosley might be the best manufacturer in the industry of turntables. Their models are simply the best, but their series share only little of similarities between each other.

If you want to know how to operate a Crosley turntable, you should first read the instructions manual. There are different models in each series that are operated differently. For the purposes of this article, we’ll use a standard Crosley record player – a pure example of standard issue Crosley player is Portable Crosley Turntable, Crosley Cruiser, and such.

Before you start – things you should know

There are several things you need to know before you actually get to the operating part. Each Crosley turntable serves one purpose, and one purpose alone – to reproduce the sound of your records. Now, there are different types of records (just as there are different types of players), and you should know which records you have and which records will your record player support.

For instance, most Crosley record players are able to reproduce the sound of standard LP (long play) records that are 7 and 8 inches long. The majority of record players can also reproduce the longer ones that are 12 and 14 inches long.

Furthermore, you should be aware of the fact that various parts, bits, and pieces of a Crosley record player come with a special cover. This cover shields them from damage, as they’re quite fragile in nature. For instance, the turntable needle is very small and flimsy, so it comes with a cover. If you want to preserve your record player, you should always remove these coverings before you start to operate your record player.

Lastly, you should never force a record. If your record player skips parts, if it hums, vibrates, or even shakes during playing, you should consider repairing it before you actually use it. Defective record players can damage your records (the same goes for wrongly cut records and defective parts).

This is not such a huge matter. After all, most record player parts are easily replaceable (and easily reparable). Now, let’s get to the part where we explain how to operate a Crosley record player.

Operating a Crosley record player

Even though operating a Crosley record player is a breeze, you can still get it wrong if you don’t do everything properly. If you miss out on some of the steps, you can damage your record player, damage your records, and, ultimately, lose some cash on repairs:

  • Read the instructions manual

Every Crosley record player comes with a user’s manual. This manual explains in detail all you need to know about your record player, the parts, and how to use it. Now, in the unfortunate event that you happen to receive your record player without a user’s manual, official Crosley™ site offers full customer service. Just give them a call and they’ll gladly help you out.

  • Put the record on the platter

It’s hard to imagine a record player that can reproduce sound without a record. However, that’s still possible – some models (including Crosley’s record players) are capable of wireless sound reproduction, USB sound reproduction, and such. In that case, you can skip this step.

  • Unlock the turntable stylus (tonearm)

Every turntable comes with a special tonearm which is locked before usage. Now, to unlock it, simply remove the small brake that’s keeping it locked. Keep in mind that these parts are fragile, so take it slow.

  • Set the turntable stylus on the record

The sound is reproduced once the record starts spinning, and that can only be achieved when the turntable stylus is on the record. The needle of the turntable stylus will then slowly graze the surface of the record, producing sound. This is pretty obvious and straightforward, but it has to be done slowly, lest you damage the needle (or the turntable stylus itself).

  • Turn on the turntable

The tricky part is as following – some turntables come without the “power” button. Most people don’t bother with the user’s manual, and think that all they need to do is simply put the record on the platter and press the “ON” button.

If that’s the case, you should always try toggling the volume. Most Crosley record players can be turned on this way, and (in the case that the user’s manual doesn’t say anything in particular), this is how you operate a Crosley turntable.

The Bad Habits That Will Eventually Destroy Your Records

There are ways to prevent potential damage to our vinyl records, but there are also habits that really get in the way of record maintenance. Have you ever wondered “why” are some of your vinyl records defective? If you’re a person that possesses these habits, you should break them as soon as possible. These habits will definitely ruin your vinyl records eventually, so here’s the top 7:

Habit #1 – Grazing the surface of your vinyl records with hands

Even though it’s self-explanatory, let’s see what happens when you graze the surface of your vinyl records. For instance, human skin is filled with dirt, grease, oils, and other things that are hazardous to record’s “health”. Each graze will leave some dirt or debris that will eventually build up and wear our vinyl records and stylus.

Occasional hand contact is unavoidable, but don’t fret it – even if you sometimes do happen to touch the surface of your records, a good cleaning will fix everything. Just make sure to avoid this altogether, if possible.

Habit #2 – Horizontal Vinyl Record Stacking

Horizontal vinyl record stacking is one of the worst habits you could develop. Most stores stack their records in boxes or in vertical rows, and only the used record bins are stacked horizontally. This way, the ring on the record sleeves wears out, making the cover of your record virtually useless.
Furthermore, there’s a lot of pressure between the sandwiched records, and there are some cases when those vinyl records that are treated this way cease to work. If you want to avoid this habit, stack your vinyl records vertically without any excess objects atop of them.

Habit #3 – Leaving your vinyl records out of their covers

Another habit that is terrible and self-explanatory. Whenever you leave your vinyl records out of their covers, you leave them without any shelter from environmental damage. Dirt, grime, bugs, and various other things will seriously damage your vinyl records if you leave them out.

Habit #4 – Carelessly dropping your vinyl records in their sleeves

There’s a certain noise that you’ll hear when you carelessly drop your vinyl record in the sleeve. This noise can be somewhat entertaining, but it’s also the noise of your record weeping. Not only will you puncture a hole in the record sleeve, you’ll damage your record as well.
A sleeve with a hole is a terrible shelter for your vinyl records, so it’s safe to say that this is a bad habit to have if you own records and a record player.

Habit #5 – Bad & Irregular Cleaning

You should regularly clean your vinyl records if you want to avoid unnecessary damage. Now, cleaning is quite easy. All you have to do is – gather up all the tools needed, wash your records, and dry them up. If you don’t want to waste time, you could always waste money – there are special machines that will clean your records for you.
Cleaning your vinyl records will remove grime, dust, and dirt from your vinyl records, improving the overall sound quality of your tracks. Irregular cleaning, on the other hand, will build up these hazardous materials on the surface of your records, damaging them.

Habit #6 – Cueing up your vinyl records by hand

Whenever you cue up your vinyl records by hand, you scratch the surface of your records. Now, it might be ironic that scratching can do harm to your records because the sound is made through scratching on a vinyl groove, but yeah, that’s how you damage your records.

If possible, you should wait out for the record to finish if you want to avoid any potential damage, but that requires a great deal of patience. An alternative solution will still damage your records, but the damage would be minimal – use a cueing lever if you want to minimize the damage.

Habit #7 – Putting out the record when the platter is still spinning

There’s one very simple rule when it comes to a spinning record platter – simply don’t touch it. Whenever it’s spinning, it means that you are supposed to enjoy your record, so that’s all you should do. If you’re itching to play another record, have a little patience and wait until the platter stops rolling.

Those people who are incapable of waiting for the platter to stop spinning usually end up damaging and scratching the surface of their vinyl records. Of course, there are ways to fix these problems, but it’s often better to prevent the damage.

Warped Records – Three Easy Methods To Fix This Problem

Introduction

Vinyl records are made of plastic, and it’s quite obvious that this material can bend, break, or warp quite easily. Records may be cheap or expensive, but they have sentimental value for most owners – there are special editions, rare & limited editions, and records that you first bought, and so on.
There’s no need to toss away your warped records, as we’re here to show you three easy ways to fix these problems easily.

What happens when a record warps?

Well, warping is easily spotted, even with the naked eye. Most people would refrain from playing these records, as it’s quite obvious that they won’t sound good (they may not even play in most cases).

In other cases, warped records will usually have inferior sound quality, and, in some extreme cases, you’ll even hear a lot of static, buzzes, and such.

How do records get warped?

Plainly speaking, records may get warped over time. Records are usually pretty old by themselves, mainly because they are considered to be a thing of the past (as CDs, Blue-Rays, and DVDs were introduced on the music market).
Some records are more than 50 years old, and time can easily warp the plastic which composes the construction of these records. There are, of course, other ways how a record can warp.

For instance, prolonged exposures to heat or extreme cold can seriously warp or even damage your records. If you don’t storage your records properly, there’s a chance that sheer physical pressure of another object may warp it too.

Anyhow, all is not lost, as you can easily fix the warping problem if you follow the steps we’ve described below.

Method #1 – Using physical force of heavy objects

The first method (which is usually the most logical one) requires you to use the physical force of other heavy objects. Sandwiching your warped vinyl record between two heavy objects will often yield positive results.
Basically, all you need to do is simply find two objects that are heavier than the vinyl records itself, and put the record between them. As vinyl records are usually lightweight, two books should do the job quite well.

These objects have to be larger than the vinyl record, as the entire surface of the record needs to be covered. Once you’ve sandwiched your vinyl, all you have to do is simply wait for a few days.

Method #2 – The heat & pressure combo

This method requires you to “cook” your vinyl record (figuratively speaking). You will need two sheets made of glass for this method, as you’ll sandwich the record between them. Once you did this, you will have to heat the oven at 79-degree C. Put the record in the oven, but make sure that it is inside for the maximum of three minutes.

The glass needs to be kept at the room temperature, lest it shatters. The heat will smooth out the surface of the vinyl, and it will make the plastic softer. Just make sure that the record isn’t inside for more than three minutes, lest it melts, rendering it unusable.

Method #3 – The combination of Methods #1 & #2

There are extreme cases of vinyl record warping where both of these methods won’t yield positive results on their own. In these cases, we recommend that you combine the two methods we’ve previously explained.

Heat up the record for three minutes at the 79-degree C, after which you will sandwich the record between two heavy objects. The combination of these two methods will definitely help you fix the warping problem.

General Prevention

The best way to fix a warped vinyl record is to avoid the warping altogether. As we’ve mentioned earlier, if you don’t storage your records properly, there’s a chance that they’ll warp (eventually). Always keep your records away from direct sunlight, lest the excess heat warp the plastic.

The same goes for extreme cold. Those places where the temperatures are below the standard room temperature can be dangerous for storage of your vinyl records. The heat and cold are very dangerous for plastic objects, including vinyl records.

Furthermore, you should also be careful with how you handle your vinyl records. The sheer pressure of a hard grip can sometimes be enough to damage your vinyl records.

This being said, if you’re careful with your vinyl records, if you storage them properly, and if you shelter them away from significant heat and cold, your records will be just fine.

Techplay ODCR238WD SP High Power NFC Bluetooth system review

Techplay ODCR238WD SP High Power NFC Bluetooth record player – introduction
turntable on sale

Check out on Amazon

Techplay ODCR238WD SP record player is one of those record players that can do whatever your mind can imagine – it’s a versatile turntable that’s packed with a manifold of high-end features, including a powerful RMS output (25W + 25W), the NFC Bluetooth feature, double CD player, USB, RCA, AUX inputs and more.

The market is full with versatile record players – 3-in-1, 5-in-1, even 7-in-1 record players, but this is “the” turntable when it comes to the well-rounded performance. Even though it comes supplied with a lot of useful functions and features, it’s actually pretty easy to use. Each part is divided, and each section of this record player has a handful of buttons that serve obvious functions.

Techplay ODCR238WD SP High Power NFC Bluetooth record player design
turntable record

This record player features a standard height and width. Its precise dimensions are 24” by 12” by 8”, and it is considered to be “moderately light” with 18 pounds of weight. These qualities make Techplay ODCR238WD SP record player a decently compact record player.

When it comes to the issue of storage, you’ll get more room if you keep the lid closed. You could enjoy your music this way, and save up some space in the process. As for the durability, this turntable is made of wood with several finishes, but the majority of the front side is adorned with plastic buttons/functions.
turntables record players

The RMS speakers are also made of wood and they’re quite durable. However, this type of material is prone to scratches, so you’d do well to avoid unnecessary repositioning. As far as the attractiveness is in question, both Techplay ODCR238WD SP record player and the RMS speakers are good to go. The outward appearance of this music system is very appealing, but they are not exactly “beautiful”. There are a lot of record players that could easily outmatch them in this field, but they’re appealing enough to pass as “attractive”.
vinyl player speakers

The design rating of Techplay ODCR238WD SP High Power record player is 7/10.

Pro

  • Very durable;
  • Made from high-quality materials;
  • Matching materials, color, and finish of the record player and external speakers;
  • Decently compact and light;

Contra

  • Not exactly “beautiful”
  • There are a lot of record players that could outmatch this turntable in the field of aesthetics;

Techplay ODCR238WD SP High Power NFC Bluetooth record player features

This is a very versatile record player that comes supplied with a manifold of features and controls. In order to avoid unnecessary confusion, we could split this section into two separate segments, the Feature Section and the Controls section:
mobile record player

The Feature Section:

Techplay ODCR238WD SP record player is supplied with two RMS external speakers (25W + 25W), the NFC Bluetooth feature, the Double CD player, the USB, several SD card slots, a headphone slot, the RCA out, Auxiliary In jacks, the digital AM/FM radio with LCD display.

  • Two RMS external speakers

These powerful speakers pack a punch of 25W (each). They’re made from the same material as the record player itself, and they’re decently durable. The only problem is that they’re prone to scratches. Anyhow, they provide a clear and rich full-spectrum sound output.
places to buy record players

  • The NFC Bluetooth feature

The NFC Bluetooth feature is one of the latest technologies in the field of Bluetooth connectivity. You can easily connect most of your electronic devices to this record player, but you should keep in mind that the NFC Bluetooth feature is not a form of broadcaster – it’s a receiver-type feature.

  • Double CD player

Techplay ODCR238WD SP record player is supplied with Double CD player which you could use to play your audio content from CD (player) or burn your audio content onto a new CD (burner). You could even use this feature to record your audio content to a CD format (recorder). The only problem is that you can’t shuffle your CDs.
record player discs

  • USB, Headphone, RCA, AUX inputs and outputs

The manifold of inputs makes connection easy. This record player has a USB port, a Headphone input, the RCA output, several Aux inputs, and more.
retro vinyl player

  • Digital AM/FM radio with LCD display

The AM/FM radio is a fully digitalized feature that’s supplied with a clearly visible LCD display. Tune in to listen to your favorite radio stations easily.

The Controls Section

The controls section is here so that you don’t have to read the user’s manual thoroughly. We’ll quickly explain what each button does so that you can enjoy your music straight away:
turntable for records

Top Part

  • Tuner/Band – this control governs the use of AM/FM radio;
  • Sleep/timer – similar to automatic shutoff feature;
  • REC/DEL – short for “record” and “delete”. Record or delete your audio data;
  • Mode/Clock – changes can be seen on the LCD display. You can change one of the several modes or see the time (if you’ve set it previously);
  • Play/Pause/Stop – push to play or pause, hold to stop;
  • Previous and Next song – these functions are quite self-explanatory;

Bottom Part

  • CD 2 enable – switches the priority of CD playback from CD 1 to CD 2;
  • Increment – decrease or increase increments;
  • Play/pause – similar to Play and Pause in the “Top Part” section;
  • Record/Erase – similar to REC/DEL function, only for the “CD 2”;
  • CD 1 and CD 2 – opens the container for CD 1 and CD 2 respectively;

The features rating of Techplay ODCR238WD SP record player is 9/10.

Pro

  • Incredibly powerful features;
  • Intelligently built;
  • Simplified controls;

Contra

  • There are too many controls which do not have obvious functions;

Techplay ODCR238WD SP High Power NFC Bluetooth record player performance
where can i buy a vinyl record player

If you want to see how good this record player performs, all you need to know is that it has a set of powerful speakers, a remote/manual method of operation, it features the Bluetooth connectivity, and it’s very reliable.

  • Great sound output

The high-performance RMS speakers have a power of 25W each. They provide a clear full-spectrum sound, and they’re probably one of the best features this record player comes outfitted with.

  • Remote/Manual method of operation

A remote controller is supplied along with the set, so you can use this record player remotely. Alternatively, you can use this turntable manually.

  • The Bluetooth function

The NFC Bluetooth function allows you to connect your electrical devices to this record player (if they support the Bluetooth feature, that is).

  • Three selectable speeds

You can playback your records at 33, 45 and 78 rotations per minute. Knowing that most record player models come supplied with the ability to reproduce audio at 2 selectable speeds, Techplay ODCR238WD SP record player is superior in this field.

  • Very reliable

Every single feature and function is fail-proof, but they might get “rusty” after extended usage, figuratively speaking.

The performance rating of Techplay ODCR238WD SP record player is 9/10.

Check out on Amazon

Pro

  • Very reliable;
  • Incredible sound output;
  • Remote/Manual method of operation;
  • Three selectable speeds;

Contra

  • The Bluetooth function is not updated;

The final verdict

Techplay ODCR238WD SP record player belongs to the top border of the cheap price point category. It’s incredibly reliable, and it’s supplied with state-of-the-art features and technologies. Wrapping it up, it’s cheap, it’s reliable, and it’s extremely powerful. If you’re down of cash, and if you’re searching for a high-quality record player, Techplay ODCR238WD SP record player might interest you. It’s worth taking a shot, especially because it’s cheap.

Geanee (Jeannie) PC Link with Record Player TT-182NPC

A short introduction about Jeannie PC Link Record Player TT 182NPC
speakers for record players

Check out on Amazon

People often think about two things when they search for their record players – “how much is this going to cost me” and “can this do the job I want it to do?” Now, when we speak about Geanee TT 182NPC Record Player, the answer to both questions would be positive.

This record player is incredibly lightweight, it’s pretty old-fashioned, nostalgic, and appealing. It’s capable of spinning your vintage records at 33 and 45 rotations per minute (it also accepts 33 and 45 RPM records only), and it comes supplied with a built-in speaker of 13 W.

Jeannie PC Link Record Player TT 182NPC Design

Speaking of design, Geanee TT 182NPC Record Player is lightweight, it’s incredibly compact and portable, and nostalgic. Its outward appearance looks pretty plain and straightforward, and simplicity just may be the reason why it’s so attractive.
where to find a record player

  • General info on dimensions

Geanee TT 182NPC Record Player is 5.5 pounds “light”. This is definitely one of the lightest record players on the market, and it’s also quite small. Its precise dimensions are 305mm in width by 288 mm in depth by 126 mm in height (excluding protrusions).

  • Lightweight body – compact and portable

Being so light, you can easily change the location of this record player without as much as breaking a sweat. The “compact” quality is very handy, as this turntable won’t take up much of your storage space.
record turn table

  • Nostalgic outward appearance

The old-fashioned outward appearance is one of the greatest things about Geanee TT 182NPC Record Player. Kick back and reminisce as you play your vintage records.

  • Simple outlook

The simplicity at its finest – Geanee TT 182NPC Record Player is comprised of incredibly simple features and its outlook is incredibly plain and straightforward.
speakers record player

The design rating of Geanee TT 182NPC Record player is 7/10.

Pro

  • Very light, portable, and compact – Geanee TT 182NPC Turntable is only 5.5 pounds heavy, and it won’t take up too much of your storage space.
  • A nostalgic outlook – nothing brings back memories the way this turntable does. Enjoy your music down the memory lane;

Contra

  • Not durable – Geanee PC Link Record Player TT 182NPC is constructed of plastic materials which are not exactly durable;

Jeannie PC Link Record Player TT 182NPC Features
turntable for vinyl records

Geanee TT 182NPC Record Player comes supplied with a built-in speaker (13 watts) that’s located on the left side of the base, a 3.5mm jack port, the RCA audio input terminal, and 3.5mm USB port, it also features PC connectivity, which is one of the main reasons why the manufacturer branded it as “Jeannie PC Link”.

As for the main features, this record player also features a Ruby turntable needle (manual operation), a motor (AC100V 50/60 Hz), and a dust cover.

Main Features

  • A ruby record player needle

The ruby turntable stylus is one of the reasons why this record player is attractive. It must be utilized manually (the opposite of “automatic record player needles”). It also features a balanced counterweight that prevents damage to your records.
digital vinyl player

  • A powerful motor

A powerful motor supplies a constant power to the record player. The power consumption ranges between 50/60 Hz, so you can enjoy your music for quite a lot without having to fear that your electricity bill will come high.

  • The built-in speaker

The built-in speaker has the power of 13 W. That’s quite low, but that’s also the main reason why this record player consumes so little energy and power. It’s located on the left side of the base of Geanee TT 182NPC Record Player.
record player and turntable

  • A dust cover

The dust cover serves as a lid too. It’s completely removable, and it is made of plastic, so it’s safe to say that it’s not exactly durable.

Side Features

  • One 2.0 USB port, RCA audio input, headphone jack (3.5 mm)
  • Volume control knobs
  • Mode select

The features rating of Geanee TT 182NPC Record Player is 6/10.
where do they sell record players

Pro

  • Simple features, simple method of operation – it’s exactly how it sounds. Nothing delicate or complex, everything about Geanee TT 182NPC turntable is plain;
  • Low power consumption – the motor and the built-in speaker consume low amount of energy;
  • Ruby turntable stylus – incredibly beautiful and highly accurate. Well-balanced with counterweight;

Contra

  • Low durability – the features are prone to damages and breaking if you don’t pay attention;
  • Mediocre quality of the features and functions;

Jeannie PC Link Record Player TT 182NPC Performance

When it comes to performance, Geanee TT 182NPC Record Player is well beyond good. If we’re to call this record player “awesome”, we need to take into account the performance rating, and the price – it’s incredible for the cash, it’s able to compare to most other turntables in the price range, but there are superior record players that can be bought if you’re prepared to pay extra.
shop record players

  • A balanced soundstage

The soundstage of Geanee TT 182NPC Record Player is quite well-balanced. The lows are apparent and deep, the midsection is pronounced, and the highs are crispy.

  • Slight humming and buzzing

Geanee TT 182NPC Record Player doesn’t have a noiseless method of operation, so slight humming can be heard from time to time. You’d be amazed at how quickly you can get accustomed to it. The buzzing isn’t unpleasant as it may seem – it actually contributes to the “nostalgic” feel.

  • Satisfactory sound output

This may not be the best-sounding record player on the market, but the overall sound output is pretty nice.

  • PC connectivity

You can connect this turntable to your PC via USB outputs – edit your audio content with ease.

The performance rating of Geanee TT 182NPC is 8/10.
usb record players

Pro

  • A balanced and accurate sound output – even though the built-in speaker isn’t exactly powerful, the soundstage is balanced;
  • PC Connectivity – you can easily connect Geanee TT 182NPC to your PC via USB ports;

Contra

  • Can only reproduce records at two selectable speeds – you can choose between 33 and 45 rotations per minute;
  • Slight humming and buzzing;

The good and bad about Jeannie PC Link Record Player TT 182NPC

Geanee TT 182NPC Record Player belongs to the budget record player price point category, so you shouldn’t expect too much for the price. It’s great when compared to other models in the price range, but it’s nothing special when compared to high-end turntables.

Pros

  • Extremely affordable – Geanee TT 182NPC record player belongs to the cheap price point category. Ideal for people who’re on a budget;
  • PC connectivity – enjoy your music or edit your content on your PC via USB connection;
  • A solid performance rating – great for the cash, but pretty standard overall;

Cons

Value for the price

Geanee TT 182NPC Record Player is cheap, and it does a pretty good bang for the buck. It’s a budget record player that’s ideal for people who’re down on cash, or for people who search for their starter record player. It’s definitely worth the cash.

The Final Verdict

This record player might not be the best turntable on the market, but it’s pretty good if you take into account all of the benefits you can take advantage of. It has a solid performance, a nostalgic design, and a set of simple features.