BEST ROOFING COMPANIES And Love – How They Are The Same
The best flat roof roofing material is without a doubt an individual sheet of rubber custom made for weather-proofing flat roofs, such as Firestone’s EPDM product.
That is laid directly onto roof boarding, itself supported by the roof rafters and nagging. Insulating material is generally laid in the space between the two, and if you are renewing your flat roof anyway you might as well take the chance of renewing that simultaneously.
This will almost certainly function as recommendation you receive from any reputable builder or roofer advising you on replacing your existing flat roof.
Until recently the most used material for a new flat roof was bituminous felt laid in three layers, the initial layer nailed down and the upper two bonded to the main one beneath with mastic bitumen. Based on the material used, this could mean heating a good bitumen-based compound to make it liquid, and pouring it onto the underlying felt and spreading it evenly on the whole section of the roof.
Then you had to hold back for the compound to cool before applying the next layer, and by the end spreading a layer of stone chippings over the roof and bonding it with a chipping compound, this being to reflect the sun’s rays preventing the felt and bitumen degrading quickly.
This was altogether a fairly messy, complicated and time-consuming job best left to the professionals. In addition, there have been several stages where it had been very easy to fail to make the roof weather-proof, e.g. where in fact the edge of the felt met the existing tile or slate roofing of the pitch roof.
On top of that, if, or rather when, there developed a leak in the flat roof, it might be very difficult and messy to learn exactly where the rain was getting back in. Seldom would the manifestation of the leak on the ceiling of the area below be directly below the source of it. Water could easily get by way of a weakness in the bitumen felt and travel along a rafter before descending to the ceiling board below.
The new generation of rubber-based flat roofing systems are far superior. For those who have reasonable DIY abilities then you can probably do-it-yourself, with one other person to assist. You can easily find a local supplier of rubber flat roof roofing material online, and the existing price is around �6.65 per square metre.
Most suppliers cut the material to the exact size and shape that you require so there are no unnecessary joins, meaning no weaknesses and an extremely long-lasting, leak-proof roof.
The vital part of the whole process is to ensure that there are no gaps between your rubber roof and any existing pitch roof where rain may penetrate. To ensure there are Soft wash roof cleaning near me is vital to run the rubber material up and under the tiles or slates of the adjoining pitch roof so that any rain dripping from the lower-most row falls onto the rubber, with no possibility of it over-lapping the edge and getting underneath the pitch roof.
Also, make sure that the existing slope of the flat roof towards the guttering or other means of water escape is maintained. The rubber is simply glued onto the roof boards and sealed where appropriate with metal brackets or bitumen so that rain penetration is impossible. Mind that the glue covers the entire underneath of the rubber to be able to avoid bumps in the surface that could obstruct the drainage of the water away.
Rubber roofs have been shown to last for more than 50 years under all weathers, so it really is the only flat roof roofing material that you need to consider when deciding on a fresh flat roof.